The Intermediate Guide The Steps To Ghost Immobiliser 2
Ghost Immobiliser 2
Guards your vehicle against key cloning and prevents thieves from driving it with the original keys. Our latest immobiliser is connected to your vehicle's CAN data network & an individual PIN code has to be entered in order for the engine to start.
Ghost unlike trackers, doesn't emit radio frequency signals and cannot be detected by diagnostic tools. There are also no LED indicators or buttons that can give the impression of its presence in your van or car.
Anti-key Cloning
The auto ghost immobiliser immobiliser is designed to combat key hacking and cloning. This device connects to the CAN data network in your vehicle and generates an unique pin code sequence that is activated by pressing the buttons from the factory on your dashboard and the steering wheel. This prevents the thief from being able to start your car. If the incorrect PIN is entered it will prevent your engine from starting, making it impossible to leave with joy and pride.
Ghost immobilisers use an innovative technology that is extremely difficult for thieves to defeat. In contrast to physical deterrents such as wheel locks and steering locks that can be cut or taken the ghost immobiliser is a discreet electronic device that cannot be detected by common thieves because it doesn't emit radio signals and is completely silent.
This next-generation immobiliser can protect your car ghost immobiliser from a variety of threats, including key hacking, relay attacks and cloned copies. It also stops a thief adding a key or replacing your ECU because it won't permit them to start your car without first entering the correct PIN.
In contrast to other immobilisers the ghost immobiliser 2 doesn't require any additional remote or key fobs to operate. It can be turned off through an app that is installed on the smartphone of the driver. This makes it ideal for the times you have to hand your car to valet parking or maintenance without key fobs.
The Autowatch ghost immobiliser birmingham-II represents the latest version of the Ghost immobiliser. It is designed to be as easy and easy to use as possible, but remains as secure as ever. This is accomplished by linking the ghost immobiliser fitting near me (Learn Even more)-II with the vehicle's CAN data network, meaning there are no wires that could be concealed or Ghost Immobiliser Fitting Near Me easily found. It also comes with built-in features that allow you to disarm the Ghost-II simply by connecting it to the vehicle's Bluetooth.
OBD port hacking
OBD port hacking is the newest method being used by professional car thieves to steal cars. Thieves have access to your vehicle's OBD by using a laptop, a mobile application, and cables that can be bought on the internet for less than PS50. Once they have access, they are able to do anything they like, from resetting your vehicle's fault codes to tuning your car, or even taking it away within a matter of minutes.
It can protect your vehicle from being stolen by requiring a specific PIN number to be entered with your key fob prior to you start the engine or leave. It does this by interacting with the vehicles ECU (Engine Control Unit) on the CAN Data circuit, and is completely undetectable to any RF scanning or code grabbing technology. It also has a Service/Valet Mode that allows your vehicle to start without the PIN code.
To make use of an OBD hacking device you require a laptop that has software capable of reading the OBD protocol. These is available for less than PS100 on eBay or Amazon. You will also need an OBD cable that has OBD pins that connect to the CAN bus. These are available on eBay and Amazon for around PS50. Then, you need to splice the cable into the wire harness of your car for example, the radio wiring harness.
Once the hacker has gained access to the OBD port of your vehicle, they will send diagnostics to the system with high baud rates, which will crash the car's CAN, and prevent the systems from working. This can cause the engine to stop or even lock doors, and even the brakes to engage.
No need for additional remotes or key fobs
An immobiliser for your car is a excellent piece of anti-theft technology that is used by millions of modern vehicles around the world. Using engine ECU software to stop cars from starting if a fake transponder signal is transmitted to it an aftermarket immobiliser can be a great way to protect your vehicle.
It is possible for a criminal to know the code that disables an immobiliser, to disable it. A burglar could easily remove the battery from most key fobs by prying them open. They could then employ a simple tool in order to take out the circuit board inside an immobiliser and replace it with blank. Then they will be in a position to start your car.
The TASSA approved Ghost 2 is an immobiliser that does not require any additional keys or remotes. The immobiliser connects directly to the vehicle's ECU (Engine Control Unit). This is done via a discrete, quiet data loop in the CAN which is not detected by diagnostic tools such as those used by high-tech thieves. It does not include a traditional keyfob, which has an LED indicators, which means it's inaccessible.
It is possible to disable autowatch ghost immobiliser's Ghost 2 automatic protection at times, such as during valet parking or a service. Ghost CAN immobilisers come with a feature called 'Service Mode that you can activate by the push of a button on your phone. The car is still operable however, the maximum speed is limited to 36mph.
If you'd like to learn more about the TASSA accredited ghost immobiliser, please contact us today to book an appointment in our workshop. A member of our team will run through an in-depth explanation of the process and provide you with your owner's manuals, installation certificates, ghost 2 immobiliser cost 2 emergency card and security guarantee.
Simple PIN code Change Process
Ghost is a next-generation device that secures your vehicle without cutting wires or putting in aftermarket key fobs. It connects directly with the vehicle's CAN data network. A personalised PIN can be programmed using buttons on the steering wheel and dash. The system blocks engine start and cannot be bypassed because no RF signals are generated from the device. This makes it difficult to detect by sophisticated scanning and RF technologies that are used by modern thieves.
The PIN code can be altered to lock out previous drivers, or even add an override code in case you forget the sequence. When installing the installer will show how to do this. The system also has a valet mode feature which can be used to temporarily disable the pin input sequence to allow your mechanic or garage can repair the car without having to know the code. This is ideal for those who wish to surrender their car to valet parking or service but still don't want to give away the PIN sequence.
Contrary to Thatcham products which require additional key fobs to operate, Ghost is a discreet system that makes use of the buttons on your car to create a unique and interchangeable PIN code sequence. The sequence is entered via the smartphone app, meaning that no additional LEDs are displayed and Ghost Immobiliser Fitting Near Me your vehicle is secure and safe from the possibility of being disabled by hackers or other technology.
Every vehicle is tested
In contrast to key fobs that require you to press buttons, a ghost immobiliser is discreetly installed under your dash or steering wheel to make sure you are unaware it's there. The device is connected to your vehicle's CAN data network and the personalised PIN code is programmed into it using buttons that are already present on your vehicle. The system will not allow your vehicle to start until this code is entered. This means that thieves can't copy the keys to your vehicle or gain access to the OBD to hack into it.
Ghost can be used in all vehicles, including electric cars motorhomes, vans, and bikes. It is also extremely versatile and can be set to disable in various situations. It can be programmed to go into Valet mode, for instance when the vehicle is taken to a valet service or parking company. This means that your vehicle can be operated within a set 30mph speed limit. The ghost immobiliser will activate itself when it returns to your property.
The device can also be reset at any time using your personal PIN number. This is a great option if you lose the code or in the event that the device becomes unusable.
It's also important to note that the device is unnoticeable to anyone who isn't familiar with it. This is due to it running through the buttons on your car's dashboard and steering wheel and uses the data they send to recognise the button that was hit. This makes it a secure and solid security system that is not able to be manipulated by RF scanning or jamming, or a door lock pick set.