20 Myths About Ghost Immobiliser Car: Busted
BMW Ghost Immobiliser
The ghost vehicle immobiliser uses the CAN data bus to communicate with your vehicle. This prevents thieves from replacing the ECU or installing new locks to bypass the security system.
Unlike other immobilisers unlike other immobilisers, the Ghost does not use LED indicators or key-fobs. Instead, it makes use of the buttons on your vehicle to allow you to enter a unique disarm sequence that you only know.
Stop & Start
If you've previously driven a BMW or used its stop-start feature, you might have noticed that the engine continues to run for about 30 seconds after you release the brake pedal. This is due to the BMW engine management system continuously monitoring your vehicle for a signal from the ignition key, and when this is found it will keep running. The Autowatch 2 ghost 2 immobiliser reviews (learn this here now) immobiliser prevents this from happening by stopping the car every time you push a button sequence.
Our BMW ghost immobiliser fitter immobiliser, which is a next-generation device, does not require you to cut OEM wires or to add key fobs or alarms from the aftermarket. It is connected to the BMW CAN data network, and is programmed with a unique PIN code that can be accessible via buttons in your car. This lets you enter the key push sequence that is not available in the usual media menus, such as volume up/down, cruise control, source or air conditioning on that prevents your car from starting until the sequence is entered. The PIN is between 4 and 20 characters, making it hard for thieves to figure out.
In addition to this we can also add a service/ valet mode to the system, this is activated when your car is scheduled for maintenance so that the Ghost is not visible to the garage. You can activate this by pressing the service button 5 times on your infotainment system (the system will flash with confirmation) and the ghost 2 immobiliser problems will automatically re-arm when you return.
With luxury vehicles being more targeted than ever we highly recommend the Ghost immobiliser to be fitted. It is completely undetectable, does not require the cutting of the original factory wires and has the ability to disable your car's engine if an incorrect pin code is entered. It's a simple but efficient method to prevent your car being stolen, even with keys that are cloned. Check out social media sites to see just how quickly new vehicles can be stolen using tools for cloning available on the internet for less than PS80.
Service / Valet Mode
The Ghost is a top-of-the-line immobiliser designed to stop your vehicle from being stolen through key cloning and hacking. It uses the factory buttons of your vehicle to create an unique push sequence that only you know. It is similar to the pin code security on your mobile phone. It's discreet, incredibly effective and deters even the most determined thieves!
If you're at home and in a meet and greet situation In a meet and greet situation, the Ghost can be switched into service mode, which allows you to start the car using your keys in the normal way, but prevents the engine from running until the proper code is entered. This is ideal for customers who need to hand their cars to valet businesses or other trusted friends & family members. This allows you to take your car to the garage for servicing or repairs, or other maintenance. without having to worry that it will be altered by an expert mechanic while you wait.
Once the service/valet mode is enabled, your BMW will not be able to drive once it has been started. This will stop anyone else from attempting to drive it while you are away. When you return, it will return to normal driving, stopping your car from being tampered with or stolen again.
We can mount the Ghost to any BMW, all you need is the correct keys as the device does not use the original remotes and can be used with them. We are TASSA registered, DBS security checked and fully system trained to ensure you are assured of the quality of our installation and that your new Ghost device will work exactly as you want it to. Your vehicle will also be registered in a database and you will receive a document that you can present to your insurance company. they are awestruck by these devices and you'll often see substantial discounts!
We can also supply an optional Bluetooth tag that can be used to disable the Ghost via an App on your smartphone (IOS & Android) or in the event that you don't own a phone or aren't comfortable with it just press the emergency card one time. This is an additional expense and requires a different Bluetooth pairing.
Anti-Hijack
Ghost created this subtle device that is unobtrusive and helps in battling the ever-increasing sophistication of high-tech thieves. It's designed to stop thieves from adding keys or replacing the ECU to start your car and drive it off. Ghost is connected to your CAN network and uses buttons on your vehicle to create an individual push-sequence that has to be entered before the engine can begin.
This will activate the anti-hijack feature and, once activated any attempt to start the engine will be immediately blocked. The system will honk the horn, flash the indicators and stop the vehicle in the event that the code cannot be found. The Anti-Hijack feature is disabled by entering your push sequence or by entering service mode that allows your vehicle to temporarily start and drive without needing to enter your PIN.
If you own a GPS device linked up to your BMW it can be used to turn off the Anti-Hijack feature, allowing you to still use the navigation system inside your car whilst the vehicle is parked and unsupervised. If you own a smart-phone, you can also connect it to your Ghost app to control the anti-hijack function and other functions.
This is a Tassa approved product that is recognized by a majority of insurance companies and will aid in reducing the risk of your pride and joy being stolen. It is completely discrete and invisible, it won't interfere with the vehicle's functionality or require any special programming skills to install or operate. It is completely undetectable to the tools used by thieves for diagnosing and Ghost 2 Immobiliser Reviews is invulnerable to key cloning because it connects to your vehicle's CAN data network.
Remote Control
We can connect the Ghost device with your mobile app to enable remote control of keyless start and go functions. This is helpful when you need to be somewhere in another location and valet or mechanic needs to start your vehicle. The system lets you start the car by selecting drive and then exit the service mode without using your key fobs. You can also track your vehicle on the map in real-time using your smartphone.
The ghost vehicle immobiliser can be installed on the dashboard or within the centre console. It is completely concealed and secure, and does not require any additional wiring. The device is connected to the CAN Data Network of the vehicle (similar to an Ethernet cable) and a personalised pin code is inserted into it. This pin code has to be selected prior to the engine's start. This prevents thieves from using a cloned key or replacing the ECU to disable this system.
If the vehicle is being taken away, the Ghost will enter service mode and shut down all functions unless you have a PIN code or can use the mobile application to disable it. This feature was designed to safeguard your vehicle from high-tech thieves who utilize relay boxes to steal it. This will stop thieves from using mobile phones to activate your sat-nav or mp3 players to locate your vehicle!
Ghost also blocks the 'Relay-style Frequency amplification'. This is the most frequent method of preventing a vehicle from being stolen with a key-fob that has been copied or stolen via hacking. Ghost lets you stop this theft by installing a device called Secure-A Key in your vehicle. The device is installed inside the key fob of your car and then disconnects the battery after a couple of inactive minutes. This can be done using the most modern PKE keys.
We are TASSA accredited (Tracking And Aftermarket Security Systems Association) A recognized body that a few insurance companies recognise and offer discounts for fitting the device. We are also DBS security-checked and fully trained to install the Ghost and ensure that the installation is completed in the highest quality. Once installed you will be provided with a certificate that you can present to your insurance company to prove of installation and allowing you to receive the best price on your car cover.
