Ghost Immobiliser Tracker It s Not As Hard As You Think
Autowatch Ghost Immobiliser Fitter
Car thieves are getting smarter and smarter so technology has evolved to keep up. Autowatch Ghost immobiliser uses your vehicles existing buttons located on the steering wheel and centre console to create an unique pincode sequence that needs to be entered prior to driving your vehicle.
The device isn't able to be detected by thieves, utilizes CAN data, and has no circuit breakers, which makes it a secure and easy-to-install system. RCA Cheadle are an approved installer of ghost 2 immobiliser review immobilisers as well as a member of TASSA.
No Key Fobs or LED Signs
The Autowatch Ghost is the first aftermarket CAN-based immobiliser designed to ensure your car is safe from key cloning and theft, as well as hacking. It is silently operated and is integrated into the CAN network of your car.
The buttons on the steering wheel and door panels of your car create an individual, reusable PIN code (up to 20 presses) which must be entered prior to driving. It's the same system that you use to access mobile banking or your credit card. You can alter it at any time. This can be done in a matter of minutes from your smartphone using the app installed, or if you prefer you could use your key fob.
This is a crucial aspect of the system which thieves will find difficult to crack or figure out because it doesn't require additional electronics like the key fob. Therefore, there is no way the thief would know what the code is and will have a difficult time finding an escape route to this. It's also unrecognizable by diagnostics since there aren't radio signals being transmitted and it isn't detected by RF scanning technology that has been used to deceive security systems in recent years.
It's also weatherproof and fits inside an extremely small, waterproof device that can be plugged into the vehicle's wiring harness at any point within your vehicle. It does not cause any damage or marks to your vehicle, making it a desirable option for those who value their vehicles and want to increase their security.
This is the most important aspect of all. Because there aren't any signals sent that would make it impossible for thieves to see that they have cracked your security device, and attempt to find ways to get around it. It's a great addition to any car owner's security, especially since the newer cars are being targeted by criminals who are able to take advantage of the new technology that is used in modern vehicles that are becoming more and more sophisticated.
No Radio Signals
As mentioned above in contrast to other safety devices that require a key fob, or a pin code, to disable them, the ghost immobiliser operates in a silent manner and doesn't emit radio signals. It connects directly to the CAN data bus, meaning that thieves would have a difficult time trying to detect its presence in your vehicle. The immobiliser will not start your vehicle unless you enter the correct PIN sequence, which can only be accomplished via a series of buttons that are pressed in a particular order - and alarm (Going to Thewall) this is easily controlled via the app.
This makes it a lot more secure than other immobilisers that employ an active system, in which the immobiliser will only shut off the ECU from power if there is a key present and it has an active signal on the board. The systems can be disabled using a tag or keypad and by entering a pin number into the keypad, or by pressing a specific sequence of buttons. The ghost immobiliser tracker immobiliser can't be disabled in this manner. If your vehicle is towed away or stolen, you won't be able drive it back until the pin code is entered.
The ghost immobiliser is also designed to be resistant to the most sophisticated theft methods like the cloning technique. This is because thieves could attempt to duplicate your key fob, or even hack into your vehicle's ECU and override its security. However, the CAN immobiliser is designed to stop this from happening, since it generates a unique pin number every time you wish to start your car, meaning that it will not be possible to start your vehicle using a cloned key or overriding system.
The CAN immobiliser also offers excellent protection against signal boosters, which are used by thieves to bypass standard security systems that are factory-fitted. This means that it is one of the most reliable and effective immobilisers that we fit at Progressive Parts. This is why it's insurance-approved, and is also a favorite among customers who have to give their car for valet parking or a service. It comes with a "Service Mode" that lets you drive your vehicle temporarily without requiring a PIN code. This is helpful if guests or valet drivers want to drive your vehicle.
No Circuit Cuts
Car theft in recent years has become increasingly frequent, with organized thieves using sophisticated diagnostics tools to detect fitted security systems. The bmw ghost immobiliser is designed to counter this by not making circuit cuts, it is unnoticeable by any diagnostics and operates in a silent manner on the vehicle's CAN data circuit. It connects to the vehicle's ECU (Engine Control Unit) and a unique pin code is entered that must be entered before the engine can begin. The thief will not be able to take your vehicle simply by replacing the ECU or putting in a new key. They must first enter the correct PIN code.
The system features a service mode that allows your vehicle to be driven and started without needing your unique PIN. This is ideal for the time that your vehicle needs its services, or when you have to leave it with a valet company or mechanic. You can also switch the switch on and off at any time to ensure that no one else will be capable of starting your car even if you're there.
Our team of skilled professionals at MotorGuard are the Midlands most renowned Ghost Fitters and can help you find the most effective solution to protect your car's most prized possession. We can assist you in choosing the most effective method to protect your vehicle against key hacking and cloning. We also offer solutions to safeguard your vehicle from stolen keys.
During our complete Ghost installation process, we will provide an extensive demonstration of how the device operates and hand over the owner's manual as well as the installer's certificate and an Ghost emergency card to give you security. We are fully insured and Alarm certified to install the Ghost device. We also offer an assurance should something go wrong after or during the installation.
The Autowatch Ghost is a subtle, next generation device that is connected to your vehicle's CAN data network and comes with a unique PIN code that you can set with our team. The PIN code is entered by pressing buttons on the dashboard as well as the steering wheel to turn off your vehicle's engine. It's a weatherproof and tiny device that isn't detected by traditional methods, meaning there are no LED indicators and it's completely hidden away during the installation and fitting. The Ghost is completely undetectable thanks to sophisticated technology that scans RF. It is also completely reversible and can be installed and removed at anytime.
No RF Scanning
Standard immobilisers are designed to stop your vehicle from starting in the event that you don't have the correct key fob or code. It does this by sending an alert to the ECU that is recognised by the engine control unit, and shuts down any components in the system that may be compromised.
Modern criminals, however, are always looking to stay ahead of car manufacturers. They have modified techniques like key cloning (relay attacks) hacking (relay attacks) as well as key theft. The thieves often resort to breaking into your property and fishing through your letterbox, stealing the keys to your car from your purse or even from your ignition.
The ghost immobiliser fitting birmingham is the first aftermarket CAN-bus immobiliser in the world that protects you from all these threats. It connects to the CAN bus, operates silently with no radio signals and cannot be detected by RF scanners that are used by organised criminals. It has been TASSA-verified and approved by insurance providers, so you can be sure that it's safe to use and won't impact your warranty.
In contrast to an immobiliser fitted by the factory, Ghost II doesn't come with an indicator for status so it's inaccessible to diagnostic tools. It's also unaffected by any other alarms, immobilisers or trackers you may have installed. This makes it a highly effective independent solution that is not disabled.
It's easy to use, too - just enter your pin code and your car will begin to start. The immobiliser also has an option for service valet which can be activated by pressing the buttons on the steering wheel or door panels. This is helpful when you want to leave your car for valet service or transport it to a garage. You can change the pin code as often as you wish, too to ensure that your vehicle is secure at all times. If you're interested in getting a ghost 2 immobiliser review immobiliser fitted to your vehicle, get in touch with us today to learn more details and to schedule your appointment at our garage in Liverpool.
